The
JL Audio M6-10STR-C-GW-RP is
a single 10-inch marine subwoofer replacement trim ring designed for the M6 Series. Continuing the nomenclature of official
Replacement Parts (RP), this component acts as the outer structural bezel that secures, seals, and finishes the perimeter of the subwoofer housing against your boat's mounting surface without requiring you to replace the entire speaker assembly.
The
JL Audio M6 Subwoofer Trim Ring handles the task of framing the subwoofer chassis. On marine vessels, the trim ring takes a beating from continuous exposure to extreme heat, fiberglass flexing, saltwater crusting, and accidental foot traffic.
Key design elements of the
M6-10STR-C-GW-RP include:
-
Subwoofer Trim Ring ("10STR"): This specific part is custom-molded to fit the wide bolt-hole diameter of 10-inch M6 marine subwoofers. It cannot be interchanged with 10-inch coaxial boat speakers due to different basket edge dimensions.
-
Classic Style Profiling ("C"): Engineered to match the smooth, continuous outer lines of the Classic mesh grille series. It drops flush around the speaker edge to maintain a uniform, luxurious layout on your boat hull or console panel.
-
Gloss White ("GW"): Molded in a high-gloss, pure white aesthetic. The color contains UV-blocking stabilizers embedded deeply into the polymer matrix to prevent the plastic from turning yellow or chalky when left under direct solar exposure.
Technical Specifications & Dimensions
Because this is a cosmetic and mounting hardware frame, its technical parameters focus on precise structural compatibility:
| Parameter
|
Specification
|
|
Component Type
|
Subwoofer Outer Trim Ring / Bezel (Single Unit)
|
|
Target Driver Size
|
10 Inches (250 mm)
|
|
Grille Series Match
|
Classic Style ("C")
|
|
Color/Finish
|
Gloss White ("GW")
|
|
Primary Material
|
UV-Inhibited Marine Polymer
|
|
Weatherization
|
Corrosion-Proof / Saltwater Resistant
|
|
Outer Diameter
|
Fits standard ~10.75-inch M6 frame profiles
|
Material Engineering & Protection Features
-
Acoustic and Vibrational Dampening: Prevents the subwoofer basket from rattling against bare fiberglass or marine starboard when pushing heavy low-end bass waves.
-
Concealed Hardware Integration: Neatly frames the outer bolt pattern, offering a seamless look that hides the raw, structural mounting tabs of the subwoofer frame underneath.
-
Salt and Fog Immunity: Built from a rugged marine polymer that will not oxidize, blister, or corrode when continuously drenched by sea spray or washed with harsh marine boat soaps.
Compatibility Information
This replacement trim ring is designed for the Classic lineup. It is compatible with:
-
JL Audio M6-10IB-C: The 10-inch infinite baffle (free-air) subwoofers using Classic White grilles.
-
JL Audio M6-10W-C: The 10-inch enclosure-optimized subwoofers utilizing Classic White grilles.
(Note: This ring is geometrically matched to the Classic series and will not sit perfectly flush with the multi-spoke Sport series grilles, which use "STR-S" variants.)
New Launch
Free shipping Over $99
Sold in last hours
